| Home
> Products > Turbo
Accessories
|
| |
Universal Type 1 Blow off valve comes with steel and alloy weld on adaptor
fittings. This
neat valve allows for improved turbo spool up, but allows the car to be
driven normally, or with a free vent sound under boost conditions.
Price:
$160 plus $12 Freight |
| |
MANUAL
BOOST CONTROLLER
The most effective instrument of its kind,this instrument is used to gain
more HP from a turbocharged vehicle. IT simply increases BOOST PRESSURE
quickly and effectively.IT is a must to any turbocharged vehicle, as it
will create great amount of power at a very cost effective price.
Price: $85 plus $12 freight |
Larger picture click here |
Hybrid
Electronic Boost Controller
Hybrid Electronic boost controllers
not only spool the turbo up quicker, but also regulates the amount of
boost pressure. Features included:- Microprocessor controlled. Closed/Open
loop design. Accurate boost regulation. Fast boost attenuation. Two boost
settings. Compact Design. Full in car adjustment. Competitve price. 9Bar/130
PSI solenoid. Easy to install with 2 built in pre-sets, easily adjusted
by two knobs in the cabin.
Price: $390.00 inc
GST
|
Gated Boost Control Valves
THE
MOST COST EFFECTIVE INCREASE IN HORSEPOWER!
Here
at Rolin we are Authirized Dealers for many aftermarket Branded Products.
We are proud to be able to supply you with any of the TurboSmart Range.
Shown Below are some of the more commonly used products. Please Contact
us in relation to any of your TurboSmart Accessory needs!
|
|
Why
do you need a Gated Boost Control Valve (GBCV)?
- Increasing
boost pressure is often the most cost effective increase in horsepower
- A
Turbosmart GBCV will allow boost pressure to be adjusted above the standard
setting
-
To avoid using un-reliable methods of increasing Boost, such as shortening
the actuator rod. This causes spring bind in the actuator and restricts
flow through the wastegate.
-
It avoids having to replace wastegate springs, which only give a fixed
increase, which is not adjustable.
|
 |
Why
choose a Turbosmart GBCV?
- All
our GBCV’s feature the Gated System - unique to Turbosmart. This
delays the pressure signal from entering the wastegate, which inturn
spools up the turbo faster, resulting in more boost at lower RPM.
- Setting
the desired boost pressure is made easy. Simply adjust the Boost Dial
on the top of the unit, without the need for any tools.
-
Turbosmart Boost controllers are capable of increasing boost pressure
to the threshold of your turbo’s capacity
- All
Turbosmart GBCV’s can be locked to prevent tampering
-
All Turbosmart GBCV’s come with comprehensive installation instructions
-
All Turbosmart GBCV’s carry a Life Time Warranty*
* Subject to Turbosmart’s usual trading terms and conditions
|
| |
BOOST TEE Set
your Boost and forget it
Boost is fully adjustable from under the bonnet
Detent System for ease of adjustment
Gated System to bring boost on faster
Can be mounted with an optional mounting bracket
Mounting Bracket – BOOST TEE only
Anodised billet aluminium
Supplied with all mounting hardware
p/n: FG-GBCV-BKT
Price: WEB SPECIAL $100.00 + Freight
|
| |
IN
CABIN
Designed to be mounted inside the cabin and allows for
boost adjustment on the run. Ideal for the active enthusiast.
Control boost from the drivers seat
Detent System for ease of adjustment
Gated System to bring boost on faster
Mounting bracket, hose and all fitting hardware supplied
Price: $209.00
|
 |
SINGLE
STAGE - Improved!
Compact design, will fit in the palm of your hand. This
unit provides fast boost response with one adjustable boost level. Ideal
for turbo cars without factory boost controllers. Switch between standard
and high boost.
High Boost setting is fully adjustable
Detent System for ease of adjustment
Gated System to bring boost on faster
Includes Rocket Launcher Switch and fitting hardware
Mounting bracket and fittings supplied
Price:
$259.00
|
 |
DUAL
STAGE - Improved!
Compact design, will fit in the palm of your hand. This
unit provides fast boost response with two adjustable boost levels. Just
toggle between high and low on the fly. Ideal for replacing factory boost
controllers.
Low and high Boost settings are fully adjustable
Detent System for ease of adjustment
Gated System to bring boost on faster
Includes Rocket Launcher Switch and fitting hardware
Mounting bracket and fittings supplied
Price:
$299.00
|
|
Rocket
Launcher Switch
• As supplied with our Switchable Gated Boost Control
Valves
• 10 Amp toggle switch with aircraft safety cover
• Ideal for switching driving lights, Nitrous kits or any other
accessory
• Comes with sticker sheet – LIGHTS, NITROUS, TURBO, BOOST,
LAUNCH & POWER
Price:
$24.00
|
| |
Boost
Controller fitting kit
This kit includes everything required to install a Boost
Controller to an engine
Suited to all Turbosmart Boost Controllers
500mm (19.7 inch) Turbosmart silicon hose
Four spring-clip hose clamps and four cable ties
Please specify hose colour
Price:
$24.00
|
| |
Twin
Turbo hook up kit
This kit allows any Turbosmart Boost Controller to be
connected to two wastegates.
For parallel twin turbos only – not suited to sequential
turbo applications
Supplied with hose, clamps and fittings required to connect to wastegate
actuators
Price:
$39.00
|
|
Notes:
We can produce our GBCV’s in a range of different colours upon request,
a surcharge may apply.
Turbosmart GBCV’s must not be used in draw through carburetor turbo
applications
Turbosmart GBCV’s may need to be used in conjunction with a Turbosmart
Fuel cut defender
Caution:
Turbosmart strongly recommends to check the air / fuel ratio when a Boost
Controller is installed. Extreme care should be taken not to increase
boost pressure beyond the engines capability. Failure to observe this
caution may result in severe engine damage. |
|
Blow-Off
Valves Multifit
One
of the many innovative features of a Turbosmart BOV is the Multi-Fit adapter
system. This system was developed by Turbosmart to make the important
job of fitting a BOV, a simple routine. The Multi-Fit adapter system is
best described as a plug and socket arrangement. In the base of each BOV
is the socket. The correct adapter slides into the socket of the BOV and
connects the BOV to the adapter. The adapter is locked in place by stainless
steel grub screws with lock nuts and is sealed tight by an O-ring.
|
|
|
BOV TYPE I
Ideal
and affordable for the small project. The Type I BOV is best suited to
engines up to 1.5 litres in capacity, producing standard or mildly increased
boost.
Adjustment via the
set and forget system
(packing shims included)
Supplied with a 38mm weld-on adapter to suit stainless or steel piping
Supported by our Multi-Fit adapters
Price: $189.00
|
| |
VEE
PORT
Features the unique variable exhaust port system resulting
in superior venting of excess pressure, a popular choice for the street.
Adjustment via the unique Quick Wrist action
(no spanners required)
Supplied with a 38mm weld-on adapter to suit stainless or steel piping
Supported by our Multi-Fit adapters
Price: $299.00
|
|
|
PLUMB
BACK
For the serious enthusiast NOT wanting to be noticed,
the Plumb back BOV allows all pressure to be vented back into the intake
system. Supplied with a 24mm, 32mm or 38mm outlet to suit your application
(please specify), refer to the adapter guide for specific model information.
Maximum flow without the noise
Adjustment via the unique Quick Wrist action
(no spanners required)
Supplied with a 38mm weld-on adapter to suit stainless or steel piping
Supported by our Multi-Fit adapters
Price: $359.00
|
|
DUAL
PORT
Due to the ever-increasing demand, we now have a BOV that
will vent to atmosphere and back into the air intake. Dual ports with
sequential timing allow quieter operation during normal driving loads
with the benefit of a Supersonic during race conditions.
Supplied with a universal blanking flange to reconfigure
to Plumb back or atmospheric dump only
Adjustment via the unique Quick Wrist action
(no spanners required)
Supplied with a 38mm weld-on adapter to suit stainless or steel piping
Supported by our Multi-Fit adapters
Price: $429.00
|
|
|
SUPERSONIC
For the serious racer wanting to be NOTICED. Widely used
in both the show and race scene worldwide. Listen to what it sounds like.
Best suited to high performance applications
Adjustment via the unique Quick Wrist action
(no spanners required)
Supplied with a 38mm weld-on adapter to suit stainless or steel piping
Supported by our Multi-Fit adapters
Hi-Flow version available on request*
Price: $399.00
|
|
MEGASONIC
This BOV is now the highest flowing in our range, out
flowing most BOV’s available, ideal for the serious racer. It also
caters for the show cars that wish to stand out from the crowd.
Best suited to high performance applications
Maximum flow and maximum noise
Adjustment via the unique Quick Wrist action
(no spanners required)
Supplied with a 38mm weld-on adapter to suit stainless or steel piping
Supported by our Multi-Fit adapters
Hi-Flow version available on request*
Price: $469.00
|
Notes: * A surchage may apply for Hi-Flow BOV’s
We can produce our BOV’s in a range of different colours upon request,
a surcharge may apply
Turbosmart BOV’s must not be used in draw through carburettor turbo
applications
All Prices stated are in Australian Dollars.
These prices are subject to change without notice.
|
