0.64 A/R exhaust housing and 0.60 A/R compressor cover. Base flange is a T25 pattern it is a direct bolt on replacement for any car with a T2, T25 or T28 Turbo on it.
Garret's GT series Turbocharger range are safe to run at 20psi + day in and day out.
Oil return Gasket and T25 Flange Gasket are included. as is the Actuator.
Bolt on replacement for SR20DET
Price:
$1850 inc GST
The GT25R Rated at 400HP has 0.64 A/R exhaust housing and 0.70 A/R compressor cover. Base flange is a T25 pattern it is a direct bolt on replacement for any car with a T2, T25 or T28 Turbo on it. The .70 compressor cover has a beautiful bell mouth 4” inlet. The large .70 compressor cover means it is not a bolt on fit on some cars without a spacer plate to lower the turbo away from the exhaust manifold..
Garret's GT series Turbocharger range are safe to run at 20psi + day in and day out.
Oil return
Gasket and T25 Flange Gasket are included. as is the Actuator.
Price: $2500 inc GST
The GT25R Rated at 450HP has 0.86 A/R exhaust housing and 0.70 A/R compressor cover. Base flange is a T25 pattern it is a direct bolt on replacement for any car with a T2, T25 or T28 Turbo on it. The .70 compressor cover has a beautiful bell mouth 4” inlet. The large .70 compressor cover means it is not a bolt on fit on some cars without a spacer plate to lower the turbo away from the exhaust manifold. Because of the larger Exhaust housing the compressor cover usually is far enough away from the exhaust manifold to clear.
Garret's GT series Turbocharger range are safe to run at 20psi + day in and day out.
Oil return Gasket and T25 Flange Gasket are included. as is the Actuator.
Price: $2550 inc GST
This turbo has the same specs as the 450HP GT25R but has a custom compressor wheel which is rated at 500HP but can make 600HP on a 2L.
The GT25R are on boost from 3500 - 400RPM depending on mods rated on a 2L engine.
Price: $3000 inc GST
The GT30 Rated at 500HP has a 0.64 A/R exhaust housing and 0.70 A/R compressor cover
Base flange is a T3 pattern, it will bolt straight on to anything that has had a T3 or TO3on it otherwise we do have flange adapters listed further down.
The 0.70A/R compressor cover has a 4" bell mouth inlet
Price: $2550 inc GSTThe GT35 Rated at 600HP has a .96 A/R exhaust housing and .70 A/R compressor cover.
Base
flange is a T3 pattern, it will bolt straight on to anything that has
had a T3 or TO3on it otherwise we do have flange adapters listed further
down or a custom manifold is recommended.
Price: $2600 inc GST
The GT35 Rated at 700HP has a 1.06 A/R exhaust housing and .70 A/R compressor cover. Also available with a 0.82A/R or a 0.63A/R Exhaust housing all rated at 700HP. with the 1.06 suiting rotary's, The .82 exhaust is great on 6 cyl cars like R33’s and Supras. The .63 exhaust is great for 2L engines.
Price: $2650 inc GST
SOLD OUT
Price: $1600 inc GST
Price: $790 inc GST